Can I contact factories directly on CNFX?

CNFX is an open directory. Each factory profile provides direct contact information.

CO₂ Injection Nozzle Component – Beverage Manufacturing

Component Specifications

Definition

A specialized industrial component designed to inject carbon dioxide (CO₂) into liquids within a carbonation chamber, featuring precise flow control, uniform dispersion, and pressure regulation to achieve consistent carbonation levels in beverage production.

Working Principle

Operates by receiving pressurized CO₂ from a supply system, then using internal orifice geometry and flow channels to create fine bubbles or mist that dissolve efficiently into the liquid, with adjustable flow rates controlled by valves or pressure differentials.

Materials

Stainless steel 316L (food-grade), PTFE seals, ceramic orifice inserts for wear resistance, FDA-compliant polymers for gaskets

Technical Parameters

Flow Rate 5-50 L/min CO₂
Surface Finish Ra ≤ 0.8 μm
Connection Type 1/4" NPT or Tri-Clamp
Orifice Diameter 0.5-2.0 mm
Temperature Range 0-80°C
Operating Pressure 2-6 bar

Standards

ISO 22000, DIN 11864, ASME BPE

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for CO₂ Injection Nozzle.

Parent Products

This component is used in the following industrial products

Carbonation Chamber

A sealed vessel within a carbonator where carbon dioxide is dissolved into liquid under controlled pressure and temperature.

View Product Details

Engineering Analysis

Risks & Mitigation

Clogging from impurities
Corrosion from acidic beverages
Pressure fluctuations causing inconsistent carbonation
Seal failure leading to gas leaks

FMEA Triads

Trigger: Mineral buildup in orifice
Failure: Reduced flow rate and uneven carbonation
Mitigation: Install inline filters and implement regular CIP (Clean-in-Place) cycles

Trigger: Worn ceramic orifice
Failure: Oversized bubbles and poor dissolution efficiency
Mitigation: Schedule preventive replacement based on operating hours

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance

Flow rate ±2%, pressure rating ±5%

Test Method

Bubble size analysis via high-speed imaging, dissolution efficiency testing per ASTM E96

Procurement Evaluation Criteria

Not customer reviews or live demand data. These dimensions support RFQ preparation and supplier evaluation.

Technical documentation

4/5

Manufacturing capability

4/5

Inspection readiness

5/5

Supplier transparency

3/5

These scores are example evaluation dimensions, not real customer ratings, country-specific buyer feedback, or live inquiry activity.

Related Components

Temperature Sensors

Temperature sensors are precision components that measure thermal conditions in beverage pasteurization systems to ensure product safety and quality.

Oxygen Sensor

Precision electrochemical sensor for real-time oxygen monitoring in beverage deoxygenation systems

Pressure/Vacuum Transducer

A precision transducer that measures pressure or vacuum levels in automated beverage container testing systems to ensure seal integrity and safety compliance.

Rejection Actuator

A pneumatic or electromechanical actuator that removes defective beverage containers from production lines in automated testing systems.

Frequently Asked Questions

How does nozzle orifice size affect carbonation?

Smaller orifices create finer bubbles for faster CO₂ dissolution and smoother texture, while larger ones allow higher flow rates but may produce coarser carbonation.

What maintenance is required for CO₂ injection nozzles?

Regular cleaning to prevent clogging from mineral deposits, inspection of seals for leaks, and orifice wear checks every 500 operating hours.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Data Basis

CNFX manufacturer profiles, technical classification, publicly available product information, and ongoing plausibility checks.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

CO₂ Injection Nozzle